No products in the cart.
-
STC.7874 Square Cut Idler Tire for Nakamichi Cassette Decks
STC.7874 Square Cut Idler Tire for Nakamichi Cassette Decks
Replacement for models 480, 480Z, 481, 481Z, 482, 482Z, 580, 580M, 581, 581Z, 582, 582Z, 660ZX, 670ZX, 680, 680ZX, 681ZX, 682ZX, 700, 700ZXE, 700ZXL, 1000, 1000ZXL, 1000ZXL Limited, Dragon LX-3, LX-5, RX-303, RX-505, ZX-7, ZX-9.
***NOTE: SOME NAKAMICHI 700 DECKS USE A DIFFERENT IDLER WHEEL – PLEASE CHECK YOUR MEASUREMENTS BEFORE ORDERING ****
All of our tires are manufactured within the last 90 days. We never sell old stock.
Meets or exceeds OEM specs.
Specifications:
- Length, OC (outside circumference): .7874 20mm
- Length, OC (inside circumference): .55″ 14mm
- C/S cross section height: 0.118″ 3mm
- C/S cross section wall width: 0.118” 3mm
Our tires are guaranteed for 1 year!
$6.95 -
Phono Turntable Idler Tire SFM1915A03 SFM1915A03250 Idler Tire EV 1407-13T
Phono Turntable Idler Tire SFM1915A03 SFM1915A03250 Idler Tire EVG part number is 1407-13T.
Brand new, manufactured within the last 90 days, not old stock.
This tire is not difficult to replace. A few small hand tools is all you need. Your old tire is more than likely a gooey mess! The gooey rubber can be removed with isopropyl alcohol, rag, Q Tips and a small screwdriver. I would recommend wearing disposable gloves.
Brand new, manufactured within the last 3 months.
$13.95 -
Replacement Needle Stylus for Crosley record players 793-D3
Diamond Needle Discontinued – Will ship a Sapphire Needle in place of the Diamond Needle
$16.95 -
PRB SCX4.0 Inch Square Belt
PRB Premium SCX 4.0 inch Square Belt
All of our belts are manufactured within the last 90 days. We never sell old stock.
Meets or exceeds OEM specs.
Specifications:
- Length, OC (inside circumference): 4.0″
- C/S cross section height: 0.047″
- C/S cross section wall width: 0.047“
Our belts are guaranteed for 1 year!
$6.00 -
ADC QLM34/III Mk III RSQ32 RSQ34 RQ36 XLM XLM/III 4110-DET Elliptical Needle
- Replaces the following needles: ADC NAD93, RK3E, RK8E, RK6E, RK7E, RK8E, K8E, RLXM100, RP36, RQ32, RSD, RSK8C, RSQ32, RSQ33, RADIO SHACK RK50E, 110-DET, 110-DEC
- Used in the following cartridges: ADC K8E, K6E, K7E, QLM32mkIII, QLM33 SERIES mkIII, QLM34 mkIII, RK8E, RK6E, RK7E, RK8E, K8E, RSQ32, RSQ30, K8, RSQ31, RSQ32, RSQ33, RQLM30, RQ30, RK5E, RP32, RSQ34, RQLM36, RSQ36, RQ36, RSQ33, RADIO SHACK RK50E, 110-DET, 110-DEC and many other ADC cartridges
- Elliptical diamond tip
- Tip Radius: .3 x .7 elliptical
- Tracking Force: 2 1/2 grams
- Speeds: 33 & 45 RPM
- Made in Switzerland
$36.95